TOP BEST-668汽車不干膠

TOP BEST-668 Automotive gap-filling butyl sealant

一、產品概述：
TOP BEST-668是一種單組份、具有永久不固化性的中性密封膠。具有優良的氣密性、耐候性。

1、Description

TOP BEST-668 is a type of netural, one-component ,permanent non-solidation sealing material , it shows good performance on air-tightness, weather resistance .

二、適用范圍：

車身橡塑密封條中的溝槽內，起到密封防水、防塵等作用。

2、Application area

Gasket, gap-filling for automotive doors, windows, inside and outside panels, etc.

三、產品特點：

1） 高溫不流淌，低溫易擠出。

2） 溫度敏感性小，密封性、耐候性好。

3、Advantage

(1)    No flowing under high temperature, easy to extrude under low temperature.

(2)    Good performance on sealing and water resistance, small temperature-sensitive.

四、包裝：

5加倫；55加倫鐵桶裝。

4、Package

5&55 gallons steel keg.

五、施工方法：

打膠泵在線涂膠，隨現場溫度的不同，可采用控制打膠泵的氣壓來控制出膠的量和直徑。

5、Usage

On line applying with the sealant pump, the application surface should be clean, dry and oil-free. The operating temperature should be within 10℃-35℃.Adjust the pressure of the pump according to deferent temperature to control the diameter of the sealant.

六、儲存有效期：

建議儲存溫度：15℃-25℃，有效期自原包裝日起12個月。

6、Storage

Storage temperature: 15℃-25℃，12months.