|
|||||||||||||||||||||||||||||||
“美氏M6478”中性硅酮密封膠是一種中性固化的高性能密封膠:
1)不腐蝕基材;
2)固化收縮率低;
3)在低溫(-45℃)至高溫(+164℃)內保持一致彈性;
4)柔軟抗震,耐變形;
5)適合于玻璃,鋁材,石材,混凝土,磚瓦,陶瓷,塑料間的非結構性粘結密封。
說明:
1)施工溫度在5℃~40℃之間;
2)用兩塊布法清潔基材;
3)將膠嘴按需要的大小做45°切斷;
4)將膠打滿接縫處。
重要:
1)使用前請做材料相容性測試;
2)不用于結構性裝配或表面溫度(45℃)以上的材料;
3)不用于滲出油污或溶劑的材料。
注意:
遠離兒童!
避免接觸眼睛和皮膚!
如有接觸,請用水沖洗;仍然不適的請就醫檢查。
執行標準:GB/T14683-2003
保質期:9個月(<24℃).
“MEISHI M6478”neutral silicone sealant is a neutral cure high perfomance grade silicone sealant:
1)Not corrosion to the materials;
2)Low shrinkage on curing;
3)Keep elastic in low(-45℃) and high(+164℃) temperatures;
4)High grade soft,be able to bear oscillation;
5)Suitable for glass,aluminum material,stone,concrete, brick, ceramic, plastic, non-structural bonding and sealing.
DIRECTIONS:
1)Construcation applycable between 5℃~40℃;
2)Substrates should be solvent cleaned using two clothes method;
3)Cut the nozzle to desired opening at 45°angle;
4)Fill the joint completely.
1)Please do materal compatibility testing before use;
2)Do not use in structural applications or where surface temperatures exceed 45℃ for material safety;
3)Incompatible oozing out oily or solvents.
PRECAUTIONS:
Keep out of the reach of children!
Avoid contact with eyes and skin!
In case of contact,flush with lot water;If still indisposed,consult a doctor.
STANDARS: GB/T14683-2003
STORAGE: 9 Months(<24℃).
